** UL Listed 9kV / 9,000 volts (6.5kV RMS) NEON SIGN TRANSFORMER POWER SUPPLY

Description

ATTENTION:
Stock photos. An item of equal or greater value with the same specifications may be substituted.
FOR INDOOR USE ONLY!
DISCOUNTS AVAILABLE
for
sign companies and neon shops
. Contact me for details.
OUTPUT: 9kV (9,000 volts) PEAK / 6.5kV (6,500 volts) RMS.
(
6.5kV will be shown on the label
)
THE OUTPUT IS SELF ADJUSTING FOR LOAD FROM 2kV TO 9kV.
PLEASE READ
AND UNDERSTAND
THE SPECIFICATIONS
BELOW!
THIS UNIT IS RATED AT 9kV (9,000 volts) PEAK VOLTAGE, AND 6.5kV (6,500 volts) RMS VOLTAGE.
THE MODEL NUMBER WILL INDICATE THE PEAK VOLTAGE. THE "OUTPUT" WILL SHOW THE RMS VOLTAGE. THE PEAK VOLTAGE IS THE NUMBER THAT IS USED TO DETERMINE HOW MUCH NEON CAN BE POWERED.
SOME MANUFACTURERS LIST THE OUTPUT AS RMS VOLTAGE AND SOME LIST IT AS PEAK VOLTAGE . IF YOU DO NOT KNOW THE DIFFERENCE PLEASE CONTACT ME FIRST BEFORE PURCHASING. IF YOUPURCHASE THIS UNIT AND CONNECT IT TO YOUR SIGN AND IT DOES NOT WORK BECAUSE IT IS THE WRONG SIZE, YOU CANNOT RETURN IT FOR A REFUND. (Please read my return policy details).
MAKE SURE THE ITEM YOU BUY IS
UL LISTED AND COMPLIES WITH UL 2161!
MANY ARE NOT. FOR YOUR SAFETY AND PROTECTION
BUY ONLY A UL LISTED PRODUCT!
WARNING!
These are
solid state
neon transformers. They are designed to
operate a neon sign only!
They
CANNOT
be used for a Tesla coil, Jacob's ladder,
wood burning,
O-zone generator or other "experiments" or "projects". They are intended to power a NEON SIGN ONLY, and they
CANNOT
be dimmed with external dimmer controls. Attempting to do any of this will destroy the unit and
VOID THE WARRANTY!
For those “electrical engineer geniuses” who think they know better and can “make it work”,
PLEASE
DO NOT
BUY THIS ITEM!
------------------------------
NOTICE!
BEFORE BUYING: BE SURE THIS IS THE PROBLEM. BE SURE THIS IS THE CORRECT SIZE!
IF YOU HAVE DECIDED TO REPLACE A NEON POWER SUPPLY THAT YOU THINK IS BAD AND
ARE NOT ABSOLUTELY 100% SURE IF THIS IS THE CORRECT SIZE YOU NEED, CONTACT US
FIRST FOR ASSISTANCE.
Most non-sign industry people either buy the wrong size replacement power supply because they do not know
how to read the old label correctly or there is something else wrong with the sign that a new power supply will not fix. There are many reasons why a neon sign may not work. A bad power supply is just one possibility.
IF YOU DO NOT KNOW OR ARE UNSURE IF THE POWER SUPPLY IS THE PROBLEM, CONTACT A
REPUTABLE NEON SHOP OR SIGN COMPANY WHO SERVICES NEON SIGNS FOR ASSISTANCE FIRST.
ONCE YOU HAVE CONNECTED THIS POWER SUPPLY TO YOUR SIGN AND ATTEMPT TO USE IT, WHETHER IT FIXES YOUR SIGN OR NOT, YOU CANNOT RETURN IT FOR A REFUND. YOU CAN ONLY RETURN IT FOR A REFUND IF IT HAS NOT BEEN USED.
IF YOU BUY THE WRONG SIZE POWER SUPPLY YOU CANNOT RETURN IT FOR A REFUND. YOU CAN ONLY RETURN IT AS CREDIT TOWARD THE CORRECT SIZE
PROVIDED IT HAS NOT BEEN USED.
ALL POWER SUPPLIES THAT ARE RETURNED AS DEFECTIVE ARE TESTED. IF YOU RETURN A POWER SUPPLY AS BEING DEFECTIVE, BUT IT IS NOT DEFECTIVE, YOU WILL BE CHARGED A DIAGNOSTIC FEE AS WELL AS SHIPPING CHARGES TO RETURN IT TO YOU.
THE WARRANTY COVERS REPLACEMENT ONLY, NOT REFUNDS. IF A POWER SUPPLY IS FOUND TO BE DEFECTIVE WE WILL REPLACE IT. A REFUND WILL NOT BE GIVEN FOR A DEFECTIVE POWER SUPPLY.
------------------------------
WE STOCK THE FOLLOWING SIZES:
3kV Self adjusting. May be used for 2kV to 3kV.
6kV Self adjusting. May be used for 2kV to 6kV including 4.5kV, 5kV, 5.5kV and 6kV.
9kV Self adjusting. May be used for 2kV to 9kV including 6.5kV, 7kV, 7.5kV, 8kV and 9kV.
12kV Self adjusting. May be used for 2kV to 12kV including 10kV, 10.5kV and 12kV.
The 9kV and 12kV are available in flashing models.
BRAND NEW WITH 2 YEAR WARRANTY
(from date of manufacture like all power supply warranties)
NeonPro Model: ME-120-9000-30
(Standard 120 volt input, 9,000 volt equivalent secondary, 30 mA)
UL listed and UL 2161 compliant.
This is a commercial duty solid-state electronic transformer for indoor use.
Self-adjusting up to a 9 KV load
(compares to a conventional core & coil 9,000 volt transformer).
Includes integral sleeve silicone GTO-10 secondary leads (very flexible), on-off pull chain switch and instructions.
SPECIFICATIONS:
MODEL: Me-120-9000-30
INPUT: 120VAC 50/60Hz 0.75A
POWER: 90W
OUTPUT: 9kV PEAK / 6.5kV RMS (
6.5kV Output will be shown on the label
)
POWER FACTOR: PF>0.9,THD<45%
WORKING FREQUENCY: 36-38KHz
OVERLOAD PROTECTION: Yes
OPEN CIRCUIT PROTECTION: Yes
EARTH LEAKAGE PROTECTION: Yes
IP RATING: Indoor type 7
INPUT CABLE LENGTH: 6.5 ft.
INPUT PLUG: 3 prong grounded
ON/OFF SWITCH: Yes, Pull chain
OUTPUT CABLE LENGTH: 2.6 ft.
WEIGHT: 1.32 lbs.
OVERALL DIMENSIONS: 5-3/4" L x 2-5/8” W x 1-5/8” H.
SEE ALL OUR LISTINGS FOR OTHER QUALITY NEON EQUIPMENT & SUPPLIES
____________________________________________________________________________
PLEASE READ THE "FINE PRINT"
SHIPPING:
FREE SHIPPING DISCLAIMER
:
Shipping for this item is free
to the United States and Protectorates. For export purchases please use the eBay Global shipping Program.
RETURN POLICY:
PLEASE READ OUR
RETURN POLICY DETAILS
. THEY ARE LOCATED ON THE “SHIPPING AND PAYMENTS” TAB, WHICH IS LOCATED DIRECTLY TO THE RIGHT OF THE “DESCRIPTION” TAB ABOVE.
BY PURCHASING THIS ITEM YOU ACKNOWLEDGE YOUR ACCEPTANCE OF OUR RETURN POLICY.
IF YOU DO NOT AGREE WITH OUR RETURN POLICY, DO NOT PURCHASE THIS ITEM!
IF YOU HAVE ANY QUESTIONS REGARDING OUR RETURN POLICY CONTACT US BEFORE PURCHASING.
PLEASE NOTE:
FOR OUR PROTECTION WE ARE REQUIRED TO SHIP THE ITEM TO THE ADDRESS THAT APPEARS ON THE "PAYPAL TRANSACTION DETAILS" PAGE THAT IS GENERATED BY PAYPAL. IT MUST BE A CONFIRMED PAYPAL ADDRESS. IF IT IS NOT, YOUR MONEY WILL BE REFUNDED AND THE SALE CANCELLED.
PLEASE ASK ANY QUESTIONS YOU HAVE BEFORE BIDDING / BUYING