Race Fan 17in 4 Blade Mechanical Cooling Fan 3/4in Hub Racefan Race-fan

Description

Shop with Confidence
-
Because of substantial delays with USPS most domestic orders with Expedited shipping chosen will ship FED-EX 2Day when possible
Race-Fan’s baseline originated from the popular 19” GM 4 blade fan, but weighs less than half the weight of the GM 4 Blade fan, plus Race-Fan’s weight is centered in the 5" diameter hub.
Mechanical Cooling Fan
17" Replaceable Fan Blades
4 Blade Fan
Includes:
3/4" Aluminum Center Hub
(4) 19" Plastic Blades
(12) Bolts
(12) Nuts
(24) Washers
You can specifically tune for your needs by adding and subtracting blades.
Race-Fans work great in Circle Track Racing, Drag Racing, & Street Rods.
Bryke Racing Part #: RFN64-1700-004-750
Where should I start?
A 19in four blade fan is a great place to start and you can tune from there. Start with a 17in four blade fan if clearance is an issue. The 17in may be more adaptable to fan shrouds as well. The 2 and 3 blade fans will move less air and a 6 blade will move a lot more air when compared to the 4 blade fan.
What should your torque the bolts to on a Race-Fan?
Bolts should be torque to 12 foot pounds / 144inch pounds
Check out our other eBay listings