Norica / Beeman RS2 gas ram / nitro piston

Description

I sell the nitro pistons. piston seal and barrel gaskets for most of airguns: Gamo, Norica, Diana, Izh - Baikal, Cometa, Stoeger, Crosman, Benjamin, BSA, Hammerli, Hatsan, Kral, Slavia, Remington and etc. Ask me, please!
Gas ram for airgun is designed for more accurate and comfortable shooting.
Vado123 Gas ram (Gas spring) for Norica air rifles.
This nitro piston doesn't require modification of your rifle. It is installed in place of the standard spring.
Resource for about 15000-20000 shots. High quality, best springs in Russia.
Compatible with models:
Norica Dragon
Norica Tribal
Norica Dream Hunter
Norica Dream Rider
Norica Marvic Gold
Norica Quick
Norica Storm
Norica West
Norica Spider
Norica Atlantic (all models)
Shanghai AR-1000 / AR3000.
Beeman RS2
Doesn't fit Norica Krono, Sport, Titan
Technical parameters:
Rod diameter: 8 mm Pump pressure: 130 ATM. The force on the rod: 65 kg Filling gas: nitrogen 80%.
Installation procedure
1. Disassemble the airrifle
2. Remove standart spring and weighting, spring rail and washers
3. Insert body of gas ram into the piston
4. Place centering washer on the heel (rear part)
5. Rod of gas ram and groove on the washer should be fitted
6. Install piston and gas ram into the cylinder (rod to heel, body to piston)
using simple clamp (not by hand!)
Preload is about 12 mm.
7. Control centering of rod through the slit of cocking lever.
7. Assemble the airgun
Attention
1. Do not scratch the rod's sufrace.
2. Changes to the design of gas ram are unacceptable
3. Don't compress the gas ram outside of airgun
4. Some oil may be extracted on the rod during exploitation - it's OK
5. For some models manual may be a little different