Film slitter to cut any roll film (current or vintage size) to any smaller size

Description

Film slitter to cut any roll film (current or vintage size) to any smaller size
Here is an easy way to get new film into your old camera that uses film that is no longer available -- or that is not available in the size that you need.  It is called a film slitter -- some people call it a film cutter, some call it a film slicer, and others refer to it as a film splicer.  Whatever you call it, it cuts a roll of film down to a thinner roll of film.  It is available in whatever size you can image -- just about. What makes it so great is that it is custom-made for your needs! If you need a
35mm
to
16mm
slitter, that's exactly what you get. BUT, these slitters come in many other sizes (see below). Let's say you want a 120 to
16mm
slitter. That's what you will get.  But let's say you want a 120 slitter that cuts
a 127
roll, and a
MINOX
roll -- ALL AT THE SAME TIME. We got them!  Amazing -- and convenient.
Each slitter can only cut ONE size of film (just about any size from 70mm and smaller), and we set it up to cut whatever smaller size or sizes that you need.
These slitters are shipped directly to your door -- for free!  ( outside of the US)  The slitters use common double-edged razor blades that are interchangeable -- but seem to never wear out!  I've sold HUNDREDS of these over the last TWENTY YEARS -- and had no returns, breakdowns, or complaints.
And the slitters come in a wide variety of sizes, as follows:
Slit 120 or 220 film:
To make SIX rolls of 9.25mm film for your
MINOX
,
Atoron
,
Chadt
,
P3
, and
Acmel
cameras
OR to make ONE
16mm
roll AND ONE 127 roll for your classic cameras -- AT THE SAME TIME!
OR to make THREE rolls of
16mm
film for your MINOLTA-16,
Mamiya-16
,
CamBinox
,
Edixa
,
GaMi-16
, Kiev,
Yashica-Y16
,
Yashica-16EE
, or any other
16mm
camera
OR to make FOUR rolls of 15.25mm film for your Minolta-16, Mamiya-16, CamBinox, Edixa, GaMi-16, Kiev, Yashica-Y16, Yashica-16EE, or any other 16mm camera
OR to make THREE rolls of
16mm
film for your MINOLTA-16,
Mamiya-16
,
CamBinox
,
Edixa
,
GaMi-16
, Kiev,
Yashica-Y16
,
Yashica-16EE
, or any other
16mm
camera PLUS a roll of
Minox
film -- AT THE SAME TIME!
OR to make FOUR rolls of
Minox
film plus a roll of
16mm
film for your MINOLTA-16,
Mamiya-16
,
CamBinox
,
Edixa
,
GaMi-16
, Kiev,
Yashica-Y16
,
Yashica-16EE
, or any other
16mm
camera
OR to make THREE rolls of 110 film for your
Pentax-110
, Minolta 110,
Yashica
110,
Fujica
110, Kodak 110 or any other 110 camera -- this does NOT create 110 perforations
OR to make THREE rolls of 17.5mm film for all of your HIT camera collectibles, such as Hit, Tone,
Mycro
,
Vesta
, Bell, and all others
OR to make ONE roll of 127 film for all of your older 127-sized cameras. The
FILMSLITTER
cuts the paper backing as well -- at the same time!
OR to make ONE
46mm
roll for your older cameras that use
unperforated
46mm
film. The
FILMSLITTER
cuts the paper backing as well -- at the same time!
OR to make one roll of 828 film for all of your older 828-sized cameras. The
FILMSLITTER
cuts the paper backing as well -- at the same time!
OR to make one roll of unperforated 35mm film!
OR to make one roll of unperforated 35mm film and one roll of 16mm film -- at the same time!
OR to make one roll of unperforated 35mm film and TWO rolls of Minox -- at the same time!
OR to make ONE roll of 126 film for all of your older 126-sized (Instamatic) cameras. The
FILMSLITTER
cuts the paper backing as well -- at the same time!
Slit
35mm
PERFORATED film:
To make TWO rolls of 9.25mm film for your
MINOX
,
Atoron
,
Chadt
,
P3
, and
Acmel
.
OR to make ONE roll of
16mm
film for your MINOLTA-16,
Mamiya-16
,
CamBinox
,
Edixa
,
GaMi-16
, Kiev,
Yashica-Y16
,
Yashica-16EE
, or any other
16mm
camera.
OR to make ONE roll of 110 film for your
Pentax-110
, Minolta 110,
Yashica
110,
Fujica
110, Kodak 110 or any other 110 -- this does NOT create 110 perforations.
OR to make ONE roll of 17.5mm film for all of your HIT camera collectibles, such as Hit, Tone,
Mycro
,
Vesta
, Bell, and all others.
OR to make THREE rolls of
8mm
film for all of your
8mm
cameras, such as Camera
Lite
and
Seastar
.
OR to make ONE roll of 21m
m
film for your F21
camera
.
OR to make ONE roll of 16mm film AND one roll of Minox AT THE SAME TIME.
Slit 35mm UN-PERFORATED film:
To make TWO rolls of 16mm film for your 16mm cameras.
OR to make TWO rolls of 17.5mm film for all of your HIT camera collectibles, such as Hit, Tone, Mycro, Vesta, Bell, and all others.
Slit
16mm
film:
To make ONE roll of
8mm
film (from perforated
16mm
film) for all of your
8mm
cameras, such as Camera
Lite
and
Seastar
.
OR to make TWO rolls of
unperforated 8mm
film (from
unperforated
16mm
film) for your
8mm
cameras, such as Camera
Lite
and
Seastar
.
OR to make TWO rolls of
perforated 8mm
film (from
perforated
16mm
film)
.
OR to make ONE roll of 9.25mm film for your
MINOX
,
Atoron
,
Chadt
,
P3
, and
Acmel
.
Slit
70mm
film:
To make ONE roll of
46mm
film for your older cameras that use
unperforated
46mm
film.
OR to make TWO rolls of
35mm
film (from perforated
70mm
film) for all of your
35mm
cameras that use
unperforated
35mm
film.  The perforations will still be there but they are different from
35mm
perforations.
OR to make TWO rolls of
35mm
film (from
unperforated
70mm
film) for all of your
35mm
cameras that use
unperforated
35mm
film.
OR to make ONE roll of 35mm film (from perforated or unperforated 70mm film) for all of your 35mm cameras that use unperforated 35mm film.
OR to make ONE roll of 120 film for all of your 120 cameras.
OR to make ONE roll of 40mm film for all of your 40mm cameras.
Slit 65mm film:
To make ONE roll of 120 film for all of your 120 cameras -- cutting off just one side of the film and leaving the perforations on the other side
OR to make ONE roll of 120 film for all of your 120 cameras -- cutting off BOTH sides of the film and most of the perforations.
As you can see, the possibilities are endless.  CUSTOM SIZES ARE AVAILABLE.  Just contact us for details. There are USUALLY no extra costs for special slitters, but it will take a few extra weeks to order, have manufactured and to finally arrive.
BEFORE YOU BID, it is a good idea to ask me what size film you want to cut and what size film(s) you want to create!  That way I can check to see if I have it in stock.
If you want more than one slitter, you get a 10% cumulative discount on each one! BUT let me know BEFORE YOU PAY -- so I can send you a revised invoice!!!!!
NO RESERVE PRICE!
FREE SHIPPING -- in the US
Returns HAPPILY accepted for ANY reason.
CHECK MY GREAT EBAY SELLER FEEDBACK.  I've been selling these slitters for over 25 YEARS!!!!  If you have a problem or question, please contact me directly FIRST -- BEFORE CONTACTING EBAY.