-40%
Custom Monocore Vented Baffle for Air Venturi Avenger & Umarex Origin Air Rifles

Custom Monocore Vented Baffle for Air Venturi Avenger & Umarex Origin Air Rifles

$ 17.41

Availability: 150 in stock
  • Condition: New
  • Restocking Fee: No
  • Return shipping will be paid by: Seller
  • Type: Baffle
  • Brand: Air Venturi
  • All returns accepted: Returns Accepted
  • MPN: Does Not Apply
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back

    Description

    Custom Monocore Vented Baffle
    for Air Venturi Avenger (.177, .22, .25 cal)
    and Umarex Origin (.22 cal)
    Air Rifles
    Picture of the part to be shipped to you
    (Color may vary from what is shown)
    Custom monocore vented baffle system designed for the Air Venturi Avenger and Umarex Origin air rifles.
    Simple drop-in installation (steps are shown below).  Does
    NOT
    require removal of the  barrel shroud.
    TO EBAY
    : This item DOES
    NOT
    VIOLATE  the Firearms and Accessories Policy - This item is for specific brands of
    Air  Rifles
    only, not Firearms.
    Before and after results obtained for my friend's.25 caliber Avenger is shown below.
    Please note that your results will vary.  Performance is highly dependent on the tune of your particular gun (hammer spring tension, transfer port sizing and other manufacturing variations), fill pressure, atmospheric conditions, as well as the ammo that you are using (you will generally notice larger differences using  heavier pellets.)
    BEFORE
    AFTER
    Avg speed: 914  fps
    26.54gr JSB Hades
    Meter placement:
    3 feet offset from centerline
    10 feet forward of muzzle
    (Many thanks to H.Halfhill for providing the test results.)
    MONOCORE BAFFLE INSTALLATION
    STEP 0
    Please remove any attached magazines from the breech, and ensure that gun is not loaded or cocked.
    Engage your trigger safety.
    STEP
    1
    Remove the endcap from your barrel shroud.
    (Yes, what is pictured here is not the Avenger or Origin, but the procedure is exactly the  same.)
    STEP
    2
    Carefully work  the baffle into the shroud, making sure not to dislodge the silicon o-ring.
    Note that the fluted end goes down into the barrel shroud.
    STEP 3
    At around this point you may encounter a stop. This is where the bottom of the baffle has  reached the tip of the barrel inside the shroud.
    STEP 4
    You may need to twist and turn the baffle in order to work it over the barrel.
    STEP 5
    Properly fitted, you'll see that the baffle sits inside the shroud and clears the threads needed for the endcap.
    STEP 6
    To complete the installation, thread back on your barrel shroud endcap.
    Recent Customer Feedback
    Terms of Sale
    .75 shipping (for first item,   for any additional items)  via USPS First Class Parcel Delivery to US Addresses.
    Visa/Mastercard/Discover/AMEX
    payments accepted thru PayPal.com payment service.
    All Sales are Final