-40%
Crosman Remington NPSS 8-RP77 gas ram / nitro piston / gas spring black
$ 19
- Description
- Size Guide
Description
I sell the nitro pistons. piston seal and barrel gaskets for most of airguns: Gamo, Norica, Diana, Izh - Baikal, Cometa, Stoeger, Crosman, Benjamin, BSA, Hammerli, Hatsan, Kral, Slavia, Remington and etc. Ask me, please!Gas ram = nitro piston = gas spring for
Crosman Remington NPSS 8-RP77 air rifles.
New.
High quality.
Pressure 150 atm.
Force 75 kg.
Rod diameter 8 mm.
Resource is more than 10000 shots.
This nitro piston doesn't require modification of your rifle. It is installed in place of the standard spring.
Compatible with models
Crosman
Remington NPSS 8-RP77
Crosman
Remington NPSS 8-RNP77XM
Crosman
Remington NPSS 8-RNP77XDCM
and other Crosman Remington models labeled Nitro Piston Short Stroke (NPSS)
Installation procedure
1. Disassemble the airrifle
2. Remove Chinese gas ram
3. Install Vado123 gas ram into the cylinder (rod to piston, body to rear part)
using simple clamp (not by hand!)
4. Rod of gas ram and groove on the bottom of the piston should be fitted.
5. Assemble the airgun
Read this
1. Do not scratch the rod's sufrace.
2. Changes to the design of gas ram are unacceptable
3. Don't compress the gas ram outside of airgun
4. Some oil may be extracted on the rod during exploitation - it's OK
5. For some models manual may be a little different.