ALUMINUM TRIGGER GROUP for Benjamin Discovery, Maximus, Fortitude, Crosman 2260

Description

This listing complies with eBay's air gun guidelines found here and I will only sell and ship air guns to buyers in jurisdictions where permitted by applicable laws - http://pages.ebay.com/help/policies/firearms-weapons-knives.html
This is an airgun trigger group, it functions differently than a firearm group. It will not fit or work with any firearm.
This trigger group fits all Discovery, Maximus, Fortitude and 2260 models. The trigger-group slot in the Maximus and Fortitude plastic stocks needs to be filed or cut longer (about 3/8") to fit or you can upgrade to a Discovery hardwood or custom stock. This plastic is thin in that location and easy to cut or file.
This custom trigger group is a high-performance single-stage setup with adjustable travel and a very light pull. The casing is machined from extremely durable, corrosion-resistant 7075-T6 aluminum. It's not
a copy of the original, it's re-engineered to fit and function better. The c
ustom sear is heat-treated 410 stainless steel. The safety and custom trigger are 7075-T6 aluminum. The return spring and adjustment set-screws are stainless steel. Travel is adjustable in both directions. This group is assembled with Mobil 28 grease and adjusted to a short travel that's very easy to pull. This produces fast response and improved accuracy which makes it ideal for hunting and target shooting. With the thinnest trigger blade in the industry and a larger trigger guard there's a lot more room for adult-sized fingers.
The trigger pull varies from around 8 oz to 3 lbs depending on how it's adjusted, how much hammer spring tension you have and how smooth your striker assembly works. This is the same group we use in our infamous Magnum Destroyer series rifles (
the most powerful .22 air rifles commercially available)
which have a trigger pull of around 8 oz. with an output of 62 FPE.
This group is shipped ready to mount and use. Further adjustment can cause the gun to fire unexpectedly or not at all, and should only be done by experienced individuals. A .050" hex wrench or bit (not included) is needed to adjust the travel screws. The top screw adjusts how high the sear rises, this should be adjusted so the safety engages smoothly without leaving forward travel for the trigger. The bottom screw adjusts how far down the sear will move, it can be adjusted to limit trigger pull to only what is need for the gun to fire. Too short of a travel
adjustment can prevent the gun from firing when the trigger is pulled. This is a dangerous situation where the hammer is partially released and could fire unexpectedly. To correct this safely, fully cock the gun and engage the safety. Then adjust the screw away from the trigger until it will fire correctly.
The custom power adjusters, hammer springs and valves we have listed are designed to produce more power with less hammer force, this helps reduce trigger pull while retaining or gaining power.
The following videos cover the Discovery model, videos for other models are planned for the near future. eBay does not allow links to be active so you need to copy the red link and paste it into the address bar above in your browser.
DISCOVERY DISASSEMBLY :
https://youtu.be/woiQMwBbVxs
DISCOVERY REBUILD ( also covers some custom parts) :
https://youtu.be/TqDrNnTGPY8
CUSTOM RIFLE TRIGGER & CASING :
https://youtu.be/uRCkcXnTKsE