Airgun Pellet Tracer Paint System .22 + .25 Cal JSB HADES PCP FX Crosman 14.3gr

Description

WE ARE THE ORIGINAL 3D PAINT PELLET SYSTEM
Introducing
the F3D 3D Printed Pellet Tracer Painting System -
___________________________________________________________________________________
_______________________________________________________________________________________________
-This System is specifically designed to work with Specific pellet brands.
#1 .22 cal version works with JSB 18g and Hades 15.9g -
Holds 80 Pellets
#2 .25 cal version works with JSB 25g + JSB 33g -
Holds 80 Pellets
#3 .22 cal version works with Crosman 14.3gr -
Ultra Magnum 14.3gr Pellets + Hollow Points 14.3gr Pellets
Holds 80 Pellets
#4 .22 Cal Version "XTRA LARGE" Full Paint System works with Crosman 14.3gr -
Ultra Magnum 14.3gr Pellets + Hollow Points 14.3gr Pellets
Holds
232
Pellets
#5 .
22 cal version "XTRA LARGE" FULL PAINT SYSTEM works with
JSB 18g and Hades 15.9g -
Holds
232
Pellets
__________________________________________________________________________________________
1 Complete system comes with
4 3D printed parts -
You get 1 full system with every Full system order
- 1 Painter Top
- 1 Pellet Tray
- 1 Pellet Holder
- 1 Pellet Pusher
___________________________________________________________________________________________________________
- EACH SYSTEM COMES Complete with 4 parts that are 3D printed ready for you to
paint your own
PELLET TRACERS!
*If you need
Replacement Painter Tops
, we sell those apart and can be ordered for painting other colors.
Please use the drop down menu.
Please make sure to choose the correct item from the drop down menu when ordering.
We combine shipping.
We will be adding more versions including different calibers to our store soon!
______________________________________________________________________________________________________________________________
Instructions for use:
When ready to paint your pellets.
A. place the pellet holder (#2) under the pellet tray.
"There are numbers on the tray so you can match them to the parts"
B. Fill up the pellet tray completely with JSB/HADES .22 CAL Pellets.
C. Click on the Painter Top (#1) to the tray.
D. Take it outside and paint it.
"Light coats work best"
E. Once pellets are dry, Painter Top (#1) can be removed from the tray and placed aside.
F. Remove the pellet holder (#2) and replace with Pellet Pusher (#3) to remove any stuck pellets.
"Most of the time, pellet pusher doesn't need to be used, as the pellets will slide out when tray is flipped over."
"We recommend using bright colors, Orange, White, Pink, Green, etc. When applying paint, light coats are preferred ( you don't want the paint running).
Spray one light coat, let it dry, then spray another light coat, etc, until your desired brightness. "
Also, adding a white paint under the orange makes orange pop more.
Remember adding too much paint does change the weight of the pellet and your POI may change, so apply just enough.
______________________________
We are working on 177, at the moment and will be released in the upcoming days.
This Painting system is 3D printed in House!
This listing complies with eBay’s air gun guidelines found here and I will only sell and ship air guns to buyers in jurisdictions where permitted by applicable laws
http://pages.ebay.com/help/policies/firearms-weapons-knives.html
NO pellets, NO paint included in this listing.
"Shipping has been a little slow lately with USPS, some deliveries are quick, some are taking a little longer than expected. We try to get out the order asap. Please take this into consideration and be patient with us and USPS. Thank you"